|
Post by jdesmond on May 28, 2019 3:40:58 GMT
Salutations, gentlefolk !
I'll probably be doing this in the near future. Anyone tried this ? Reports, tips, recommendations sought.
Thanks, very much.
|
|
|
Post by notjustromans on May 29, 2019 18:49:21 GMT
I have done this with fairly good success, I bought 8.5x11 sheets from amazon for much less than most kits...I do recommend getting the decal bonder spray from Testors,, I was able to find a can at hobby lobby, then I print out in draft black and white the decals I want so I know what size it will take on a sheet of paper, then I cut a portion of my decal paper and simply tape it over the draft print job and then print again using color and photo quality, then after it has some time for the ink to dry it gets a spray of decal bonder spray and bamm, I have decals
|
|
|
Post by bob on May 29, 2019 19:20:20 GMT
I got decal paper and fixative from MicroMark. It came with lots of good instructions. www.micromark.com
|
|
|
Post by haywire on May 30, 2019 19:32:52 GMT
|
|